Page 1 of 1

How i can animate a camera on wz3

PostPosted: Thursday, 18.September 2014, 10:22
by quickyman
hi guy's,

I tried now some different thing to animate a camera on wz3.
simple rotation is no problem. I tried the same way how i used for wz1 -- no chance
creation a new spline then i moved the cam and i tried to set a key then moved the cam to the next place and set the next key --- no chance
i anyone can help would be great. thanks

Re: How i can animate a camera on wz3

PostPosted: Thursday, 18.September 2014, 18:45
by Skinnytorus
Hi.
Try this:
1) Create your scene.
2) Stack Scene operator beneath.
3) Stack Viewport op beneath the Scene
4) Stack Spline operator as the Viewport's second input
5) Press 's' on Viewport operator (this will put camera in default position)
6) Press 'z' in 3d viewport to enter into FreeCam mode. Now you can control your camera.
7) Now go to the Spline para window and press Select to the left of the first entry in the table (this will select the key to capture your cam to)
8.) Now set your view in 3d viewport and press 'k'. This will capture your cam position and copy it to the selected spline key.
9) Add more keys to the spline (Add button to the right of the spline key table) and repeat steps 7 and 8 for each of them.
10) Play your cam animation and enjoy! :)

Re: How i can animate a camera on wz3

PostPosted: Monday, 22.September 2014, 10:57
by quickyman
thanks to you Skinnytorus,

i will it try